CONTAINERS AND TANKS

Tanks and tanks are designed for receiving, dispensing, and storing various liquid media. In this case, unlike other types of containers, these are produced for filling, that is, the reception is carried out without any pressure. The pressure of the working medium should not exceed 0.05 MPa. Industrial tanks and tanks have a wide field of application. They are used to store not only oil products, but also any liquid media, including gas condensate, sewage and even drinking water. There are three types of vessels: · Capacities of type ЕП, ЕПП · Horizontal reservoirs of RGS, RGSP · Vertical tanks of RVS * Capacities of type ЕП, ЕПП This type of equipment is designed for discharging residues of light and dark petroleum products, oil, oils, condensate (including mixture with pipeline water), as well as for sewage. At the request of the customer, it is possible to produce a container with an electric pump and a shelter for it, as well as an internal heater. It is possible to manufacture tanks in the following climatic versions: - UHL in accordance with GOST 15150 (when delivered to regions with moderate and cold climates) - CL according to GOST 15150 (for regions where the cold climate prevails) Variants of material execution: 1. Steel St3 under temperature conditions up to -30 ° C 2. Steel 09Г2С-12 under temperature conditions up to -40 ° C 3. Steel 09G2S-15 under temperature conditions up to -60 ° C * Horizontal tanks RGSN, RGSP Horizontal tanks type RGS are designed for storage, as well as receiving and issuing light and dark petroleum products, industrial water. The design of the tank provides for both ground and underground installation. Vessels of the RGS type can have flat and conical bottoms. At the request of the customer, the equipment can be equipped with maintenance areas, as well as single-walled and double-walled. The maximum volume of the tank is 200 m3. Variants of climatic performance: · UHL according to GOST 15150 (when delivered to regions with moderate and cold climates) · CL according to GOST 15150 (when delivered to regions with cold climate) Variants of material execution: · Steel St3 (if the ambient temperature does not exceed -30 ° C) · Steel 09Г2С-12 (if the ambient temperature is not lower than -40 ° C) · Steel 09Г2С-15 (at air temperature up to -60 ° C) · Stainless steel 12Х18Н10Т (analogue AISI) * Reservoirs vertical RVS Vertical tanks RVS rather multifunctional. The design allows you to store not only petroleum products, but also other liquids, including water. The specifications depend on the customer's requirements. The equipment is supplied with all accessories. At the request of the customer, it is possible to install maintenance sites, ladders, additional fittings, etc. It is also possible to produce RVS tanks with a heat-insulated jacket (when it comes to deliveries to areas with a cold climate). Structures of vertical steel tanks are manufactured by the following methods: · Roll assembly; · The sheet assembly; · Combined method, depending on the customer's wishes, transportation and installation conditions. Climatic performance: • UHL according to GOST 15150 (supplied to regions with moderate and cold climates) • CL according to GOST 15150 (for delivery to regions with a cold climate) The following options for material execution are possible: - Steel St3 (if the ambient temperature does not exceed -30 ° C) - Steel 09G2S-12 (if the ambient temperature does not exceed -40 ° C) - 3 Steel 09G2S-15 (with air temperature up to -60 ° C) - Stainless steel 12H18N10T (similar to AISI) Plant PZEM offers to buy any kind of tanks and tanks at the manufacturer's price. Production time: 30-45 days Warranty: 18 months from the date of shipment Delivery: Russia, Kazakhstan, the Republic of Belarus, Ukraine, Uzbekistan, Azerbaijan, Armenia