English
New goods
Description
The protective-decorative coat-enamel "3 in 1" rusty and clean metal performs three functions: rust Converter, anti rust primer and protective enamel. Forms on the painted surface lightfast, weatherproof coating that stops further corrosion on the metal and provides protection from corrosion.
The ground-enamel on a rust 3-in-1 MAY is intended for painting of clean and rusty metal surfaces, including large structures, products of a complex configuration (grating, pipe, fence, etc.), operated in atmospheric conditions. Allowed staining of wooden surfaces.
Characteristics
- Flash point in a closed crucible, ºС (class 3, subclass 3.3)
- 23 or more, but less than 61
- Structure
- alkyd varnish, pigments, targeted additives, solvents, desiccant
- Drying of each layer at a temperature of (20 ± 2) 0С until ready for use
- 24 hours
- Grinding degree, micron, no more
- 50
- Strength of the coating upon impact on the device of the U-1 type, cm, not less
- 30
- Hiding power of the dried coating, g / m2, no more
- 100-220
- Colors
- White, black, yellow, red, green, salad, blue, gray, brown, blue
- Flexural elasticity of the film, mm, no more
- 2
- Mass fraction of non-volatile substances,%
- 50-80
- Warranty period of storage
- 18 months
- Consumption for one coat
- 1 kg per 5-10 m 2
- Coating hardness according to the pendulum device of the TML type (pendulum A), relative units, not less
- 0,15
- The gloss of the coating at an angle of illumination of 45 ° according to the device of the BF-5 type, units, not less
- 19
- Precautionary measures
- transport and store in a tightly closed container away from heating appliances. Protect from moisture and direct sunlight. Keep out of the reach of children.
- Coating resistance to static effects of liquids at a temperature of (20 ± 2) ° С, hour, not less
- 24
- Conditional viscosity according to a viscometer of the VZ-246 type with a nozzle diameter of 4 mm at a temperature of (20.0 ± 0.5) 0С, s
- 120-220
