CONTACTLESS MANAGEMENT PROGRAMMER

Programmer PROGREKS-05-IMZ is designed for contactless control of parameters of implanted pacemakers BAIKAL-332, EKS-323-IMZ, EKS-321-IMZ, EKS-310-IMZ, EKS-501 via a telemetric or magnetic communication channel. The programmer consists of the programming control unit and the telemetric or magnetic programming heads connected to it. Telemetry head programmable: EX-BAIKAL-332 IS-1-3,2; EX BAIKAL-332-5,2; Magnetic head programmable: ECS-323-IMZ, ECS-321-IMZ; EKS-310-IMZ, EKS-501; Modification of the programmer for new models of pacemakers is carried out by updating the software version. The programmer provides the possibility of implementing additional functions: * organization of the telemetry information exchange channel with a pacemaker; * diagnostic and test modes; The delivery set of the programmer can be of two options: * without magnetic head; * with a magnetic head (at the request of the customer); Technical details. The programmer generates coded sequences of telemetry pulses or magnetic pulses, which provide programming of parameters of pacemakers at a distance of 2–5 cm. The programmer provides: * programming of pacemakers one parameter per cycle, * all parameters per cycle * programming standard parameters according to the type of pacemaker. Parameters and their values are determined by the type of pacemaker. The readiness of the programmer for programming is confirmed by the flickering of the LED on the heads. The programmer automatically turns off the display after 2 minutes after the last touch of the touch panel or pressing any button. The establishment of the operating mode is not more than 2 c. Programmer, telemetry and magnetic heads are made in plastic cases. On the front panel of the programmer are located: * LCD panel combined with a touch panel; * buttons EXTRA MODE, ENTER, CANCEL, PROGRAMMING, STANDARD, SERVICE; * buttons; On the side of the programmer is the power button. On the back of the programmer is located: * compartment with a removable cover for batteries (batteries) * connector for connecting a telemetric (magnetic) head, * Computer connector (RS-232). On the case of the telemetric (magnetic) head are located: * LED ready for programming; * programming initialization button; The programmer is powered by four AA batteries of 1.2 V with a capacity of at least 2000 mAh or alkaline AA batteries of 1.5 V. Time of continuous work from batteries (accumulators) not less than 10 hours. Dimensions: * programming control block 285 x 185 x 90 mm; * telemetry head 165 x 65 x 32; * magnetic head 155 x 100 x 55 mm;